 |
|
Installation of the rotating car display |
|
1-BE SURE THE TABLE IS LOCKED.
|
| 2-SCREW THE REAR SUPPORT BY TURNING IT CLOCKWISE. PUT THE SAFETY LOCK IN ITS POSITION(THE REAR LEG).
|
| 3-CENTER THE CAR ON THE RAMP, GO FORWARD(SLOWLY) UNTIL THE RAMP TILTS DOWN. WHEN THE RAMP IS DOWN, MOVE TOWARDS THE FRONT.
|
| 4-SLIDE THE RAMPS IN.
|
| 5-CONTERBALANCE THE CAR ON THE RAMP AND UNLOCK IT.
|
|
|
YOU CAN NOW PLUG IT AND ENJOY!!!
1-UNPLUG THE MOTOR AND LOCK THE TABLE.
|
| 2-MOVE THE CAR FORWARD TO REMOVE THE WEIGHT TO THE FRONT.
|
| 3-SLIDE THE RAMPS OUT.
|
| 4-UNLOCK THE REAR SUPPORT. UNSCREW THE REAR SUPPORT.
|
| 5-GO INTO THE CAR AND BACK UP SLOWLY UNTIL THE RAMP TILTS DOWN.
|
|
YOU CAN NOW GIVE THE KEYS BACK TO YOUR CUSTOMER !!!
|
